Toolbars

Standard Toolbar

The following buttons are available on the Standard Toolbar on the left side of the screen:

New Project

Creates a new RMCTools project.

Open File

Opens an existing RMCTools project, plot, or event log file.

Save Project

Saves the RMCTools project.

Cut

Cuts the selection and places it in the clipboard.

Copy

Copies the selection to the clipboard.

Paste

Pastes the clipboard contents.

Controller

Indicates the state of the controller.

	RMCTools is not communicating with the controller.
	RMCTools is connected to the controller and the controller is in PROGRAM Mode.
	RMCTools is connected to the controller and the controller is in RUN Mode.
	RMCTools is connected to the controller and the controller is in the Disabled state (RMC200 Only).

Click the controller button to do any of the following:

Go Online
Go Offline
Change the Connection Path
Download All to Controller
Upload All from Controller
Enter RUN Mode, PROGRAM Mode, or the Disabled state (RMC200 Only).
View Controller Properties

Fault Controller

Sends the Fault Controller (8) command to the controller. This command halts all the axes and puts the RMC75 and RMC150 in PROGRAM mode.

For the RMC200, this command puts the RMC in the Disabled state.

Axis Tools

Opens the Axis Tools window.

Shortcut Command Toolbar

Use Shortcut Command Toolbar on the right side of the screen to issue Shortcut Commands. The following button is also located next to the Shortcut Command buttons:

Help	Opens the help.

To Issue a Shortcut Command

Click on one of the numbered buttons to issue the commands assigned to that button for the selected shortcut set. The grayed buttons do not have not been assigned any commands.
Or, press Ctrl + num on the keyboard, where num is the number of the button, e.g. Ctrl+2.

To Select a Shortcut Set

Choose the active shortcut set from the box.